Split Tensile Strength Test of Concrete (Cylinder)
STEP
1
Objective: To determine the split tensile strength of cylinder concrete specimen as per IS 1199. Apparatus used: CTM, Split tensile loading setup Specimen Type
STEP
2
Provide Specimen Details Enter the Age of specimen: DaysSelect the Diameter (D) of the Specimen: mmSelect the Length (L) of the Specimen: mm
STEP
3
a). Click on the specimens to take them out of the curing tank.
b). Click on the cloth to wipe off the surface water on the specimens. Note: Any projecting fins shall be removed from the surfaces which are to be in contact with the packing strips.
STEP
4
a). Using a marker, central lines shall be drawn on the two opposite faces.
Note: Ensure that they are in the same axial plane.
STEP
5
a).Place the specimen in machine with lines marked on the ends stay vertical and centered over the bottom plate.
Note: Place the other hardwood strip below and above the specimen.
STEP
6
a). Click Numpad on CTM for zoom view.
b). Enter the rate of loading in KN/sec so that the effective rate of loading is from 1.2 to 2.4 N/mm2/min.
KN/s
STEP
7
STEP
8
Fracture type
STEP
9
STEP
10
Fracture type
STEP
11
STEP
12
Fracture type Click Next to Repeat the test.
STEP
13
STEP
14
Fracture type
STEP
15
Observations:
Click Show button to see load at failure of samples (P), failure type.
STEP
16
Final Results:
Click View button to see Results for new specimen
STEP
17
Report
Length (L) of specimen =
Diameter (D) of specimen =
Concrete grade=
STEP
17
|